Projects / Ideas / Phone-controlled lamp brightness

Phone-controlled lamp brightness

BeginnerSmart HomeIdeaReviewed
In short

How do you build a phone-controlled lamp brightness?

A Bluetooth module lets a phone terminal app set an LED lamp from 0 to 100 percent. You need Arduino Nano, JDY-31 Bluetooth module, Resistor 1 kΩ, Resistor 2.2 kΩ, LED 5 mm red, Resistor 220 Ω and Breadboard 830 Tie Points.

Level
Beginner
Time
About 180 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Control a lamp over Bluetooth.

Parts list

How to build it

  1. Level-shift the module input
  2. Pair the phone
  3. Parse a number
  4. Set PWM brightness
  5. Report the level back

Related projects

Common questions

What parts do I need for the phone-controlled lamp brightness?

Arduino Nano, JDY-31 Bluetooth module, Resistor 1 kΩ, Resistor 2.2 kΩ, LED 5 mm red, Resistor 220 Ω and Breadboard 830 Tie Points.

How long does the phone-controlled lamp brightness take to build?

About 180 minutes for a beginner maker.