Projects / Ideas / Thermometer gun teardown lab

Thermometer gun teardown lab

IntermediateHome LabIdeaReviewed
In short

How do you build a thermometer gun teardown lab?

You open a spare infrared thermometer, identify its parts, and compare its reading with a contact sensor. You need IR thermometer gun, DS18B20 waterproof probe, Arduino Nano, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 180 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Understand a commercial instrument by taking it apart.

Parts list

How to build it

  1. Open it with safe tools
  2. Identify the sensor and chip
  3. Compare readings on a warm mug
  4. Note the angle and distance effects
  5. Rebuild or recycle

Related projects

Common questions

What parts do I need for the thermometer gun teardown lab?

IR thermometer gun, DS18B20 waterproof probe, Arduino Nano, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the thermometer gun teardown lab take to build?

About 180 minutes for a intermediate maker.