Projects / Ideas / Inductor kick demo

Inductor kick demo

IntermediateLearningIdeaReviewed
In short

How do you build an inductor kick demo?

You see the voltage spike when current in a coil is switched off, with and without a diode. You need Inductor 33 µH power (CD54), Arduino Nano, MOSFET IRLZ44N, Rectifier Diode 1N4007, Resistor 10 kΩ and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 150 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

See why flyback diodes matter.

Parts list

How to build it

  1. Switch the coil with a MOSFET
  2. Measure the spike with a scope
  3. Add the diode
  4. Compare the spike
  5. Try different coils

Related projects

Common questions

What parts do I need for the inductor kick demo?

Inductor 33 µH power (CD54), Arduino Nano, MOSFET IRLZ44N, Rectifier Diode 1N4007, Resistor 10 kΩ and Breadboard 830 Tie Points.

How long does the inductor kick demo take to build?

About 150 minutes for a intermediate maker.