Idea
In short
How do you build a friction on a slope?
An ADXL345 on a tilting board measures the angle while a block rests on it, a piezo disc senses the slip, and a Pico records the angle at which it moves, from which it works out the friction coefficient. You need Raspberry Pi Pico H, ADXL345 accelerometer, Piezo vibration sensor (disc), SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure the friction between two surfaces.
Parts list
- Development Boards
- Sensors
- Sensors
- Displays
- Switches
- Prototyping
How to build it
- Hinge a board and fit the sensor
- Read the angle
- Detect the slip with the piezo disc
- Record the slip angle
- Work out the coefficient
Common questions
What parts do I need for the friction on a slope?
Raspberry Pi Pico H, ADXL345 accelerometer, Piezo vibration sensor (disc), SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the friction on a slope take to build?
About 150 minutes for a intermediate maker.
