Projects / Ideas / Three-gauge TFT dashboard

Three-gauge TFT dashboard

IntermediateDisplaysIdeaReviewed
In short

How do you build a three-gauge TFT dashboard?

A colour touch-sized screen draws three live gauges for temperature, light and a knob value with colour bands. You need Arduino Uno R3, 3.5 inch TFT SPI (ILI9488), BME280 Environmental Sensor, BH1750 light sensor, Potentiometer 10 kΩ and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 240 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Draw gauges on a TFT.

How to build it

  1. Wire the screen on SPI
  2. Draw a gauge outline
  3. Update only the needle
  4. Add colour bands
  5. Show three gauges

Related projects

Common questions

What parts do I need for the three-gauge TFT dashboard?

Arduino Uno R3, 3.5 inch TFT SPI (ILI9488), BME280 Environmental Sensor, BH1750 light sensor, Potentiometer 10 kΩ and Breadboard 830 Tie Points.

How long does the three-gauge TFT dashboard take to build?

About 240 minutes for a intermediate maker.