Projects / Ideas / Three-knob colour mixer

Three-knob colour mixer

BeginnerDisplaysIdeaReviewed
In short

How do you build a three-knob colour mixer?

Three knobs set red, green and blue values and a colour swatch on a TFT shows the mix, with the numbers beside it. You need Arduino Uno R3, ILI9341 TFT Module, Potentiometer 10 kΩ × 3 and Breadboard 830 Tie Points.

Level
Beginner
Time
About 180 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Mix colours with knobs.

Parts list

How to build it

  1. Wire the display
  2. Wire three knobs
  3. Read each knob
  4. Fill a swatch
  5. Show the 16-bit colour value

Related projects

Common questions

What parts do I need for the three-knob colour mixer?

Arduino Uno R3, ILI9341 TFT Module, Potentiometer 10 kΩ × 3 and Breadboard 830 Tie Points.

How long does the three-knob colour mixer take to build?

About 180 minutes for a beginner maker.