3.5 inch TFT SPI (ILI9488)
Larger SPI TFT for ESP32 dashboards.
TypeColour TFT
Size3.5 inch
Resolution320 × 480
Driver ICILI9488
DisplaysReviewedMPN ILI9488 3.5 SPIUsed in 2 projects
In short
What is the 3.5 inch TFT SPI (ILI9488) and what is it used for?
Larger SPI TFT for ESP32 dashboards. Makers use it for bigger ESP32 dashboards.
How it works
An ILI9488 controller driving a 320 × 480 TFT.
Key specifications
| Display spec | Value |
|---|---|
| Type | Colour TFT |
| Size | 3.5 inch |
| Resolution | 320 × 480 |
| Driver IC | ILI9488 |
| Interface | SPI |
| Supply voltage | 3.3 V logic |
Pinout
VCC3.3 to 5 V
GNDGround
CS RESET DCControl
SDI SCKSPI
LEDBacklight
SDOSPI read
Touch and SDSeparate pins
How to use it
Use TFT_eSPI with the ILI9488 driver. Over SPI it sends 18-bit colour, so full-screen redraws are slower than on an ILI9341. Its MISO line does not release the bus, so leave SDO unconnected if touch or SD share SPI.
Applications
Bigger ESP32 dashboards
Builds that use it
Alternatives
- 2.8 inch TFT touch (ILI9341, SPI)Smaller and faster
- Nextion 3.5 inch HMI displayOffloads drawing
Common questions
What is the 3.5 inch TFT SPI (ILI9488) used for?
In maker projects: bigger ESP32 dashboards.
How does the 3.5 inch TFT SPI (ILI9488) work?
An ILI9488 controller driving a 320 × 480 TFT.
What voltage does the 3.5 inch TFT SPI (ILI9488) need?
3.3 V logic.
How do I connect the 3.5 inch TFT SPI (ILI9488) to an Arduino or ESP32?
SPI. Pins: VCC (3.3 to 5 V), GND (Ground), CS RESET DC (Control), SDI SCK (SPI), LED (Backlight), SDO (SPI read).
What can I use instead of the 3.5 inch TFT SPI (ILI9488)?
2.8 inch TFT touch (ILI9341, SPI) and Nextion 3.5 inch HMI display.
