Idea
In short
How do you build a WAV player from a card?
An ESP32 plays short sound files from a card through an I2S amplifier and small speaker. You need ESP32 DevKit V1, MAX98357A I2S amplifier breakout, MicroSD Card Module, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Stream audio through I2S.
Parts list
- Development Boards
- Audio
- Interfaces
- Switches
- Prototyping
How to build it
- Wire the I2S pins
- Read a WAV file from the card
- Stream samples to the amplifier
- Add play and stop buttons
- Limit the volume to protect the speaker
Common questions
What parts do I need for the WAV player from a card?
ESP32 DevKit V1, MAX98357A I2S amplifier breakout, MicroSD Card Module, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the WAV player from a card take to build?
About 240 minutes for a intermediate maker.
