Idea
In short
How do you build a level-shifter sensor bridge?
A level shifter lets a 3.3 V sensor talk safely to a 5 V Uno, and a test shows why it matters. You need Arduino Uno R3, I2C level shifter (2-channel BSS138), BME280 Environmental Sensor and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Connect 3.3 V to 5 V safely.
Parts list
- Development Boards
- Interfaces
- Sensors
- Prototyping
How to build it
- Read the voltage rules
- Wire both sides
- Connect the sensor
- Scan for the address
- Write a rules sheet
Common questions
What parts do I need for the level-shifter sensor bridge?
Arduino Uno R3, I2C level shifter (2-channel BSS138), BME280 Environmental Sensor and Breadboard 830 Tie Points.
How long does the level-shifter sensor bridge take to build?
About 150 minutes for a intermediate maker.
