Projects / Ideas / Handmade level shifter

Handmade level shifter

IntermediateLearningIdeaReviewed
In short

How do you build a handmade level shifter?

Build a two-line I2C level shifter from two small MOSFETs and four resistors, and learn why it works in both directions. You need Arduino Uno R3, BS170 N-channel MOSFET × 2, Resistor 10 kΩ × 4, BME280 Environmental Sensor and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a bidirectional level shifter.

Parts list

How to build it

  1. Draw the shifter
  2. Wire the first line
  3. Wire the second line
  4. Scan the bus
  5. Measure both sides

Related projects

Common questions

What parts do I need for the handmade level shifter?

Arduino Uno R3, BS170 N-channel MOSFET × 2, Resistor 10 kΩ × 4, BME280 Environmental Sensor and Breadboard 830 Tie Points.

How long does the handmade level shifter take to build?

About 210 minutes for a intermediate maker.