Idea
In short
How do you build a fibonacci clock?
Five coloured blocks of size 1, 1, 2, 3 and 5 on a matrix tell the time, where the blocks that are lit add up to the hours and the minutes in fives. A puzzle clock that is fun to read and a good way to practise the Fibonacci numbers and drawing blocks on a matrix. You need Arduino Nano, DS3231 RTC module, WS2812B 8x8 RGB LED matrix, Resistor 330 Ω, Tactile push button 6 mm × 2, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 100 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Tell the time with Fibonacci blocks.
Parts list
- Development Boards
- Sensors
- Displays
- Passives
- Switches
- Prototyping
- Prototyping
How to build it
- Read the time from the clock chip
- Pick which blocks add up to the hours
- Pick which blocks add up to the minutes in fives
- Colour hours, minutes and both
- Set the time with two buttons
Related projects
Common questions
What parts do I need for the fibonacci clock?
Arduino Nano, DS3231 RTC module, WS2812B 8x8 RGB LED matrix, Resistor 330 Ω, Tactile push button 6 mm × 2, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the fibonacci clock take to build?
About 100 minutes for a intermediate maker.
