Projects / Ideas / Giant matrix clock

Giant matrix clock

IntermediateDisplaysIdeaReviewed
In short

How do you build a giant matrix clock?

A LED matrix driver board draws large digits for a clock you can read across a room. You need Arduino Nano, HT16K33 LED matrix driver, DS3231 RTC module and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use an I2C matrix driver.

Parts list

How to build it

  1. Wire the driver on I2C
  2. Draw digits
  3. Show hours and minutes
  4. Dim at night
  5. Add a seconds dot

Related projects

Common questions

What parts do I need for the giant matrix clock?

Arduino Nano, HT16K33 LED matrix driver, DS3231 RTC module and Breadboard 830 Tie Points.

How long does the giant matrix clock take to build?

About 210 minutes for a intermediate maker.