Idea
In short
How do you build a hearing amplifier study?
A mic, filter and headphone amp boost speech frequencies, to learn how hearing aids shape sound. You need MAX9814 microphone with AGC, LM358 Op-Amp, Resistor 10 kΩ × 4, Ceramic capacitor 10 nF × 2, Electrolytic capacitor 10 µF × 2, Headphone jack module 3.5 mm, Potentiometer 10 kΩ, Battery holder 2 × AA and AA alkaline battery × 2.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a band-pass filtered amplifier.
Parts list
- Audio
- Integrated Circuits
- PassivesResistor 10 kΩ × 4
- Passives
- Passives
- Audio
- Passives
- Power
- Batteries
How to build it
- Pick up sound with an AGC mic
- Filter to 300 Hz to 4 kHz
- Amplify for headphones
- Keep volume safe
- Compare with and without the filter
Common questions
What parts do I need for the hearing amplifier study?
MAX9814 microphone with AGC, LM358 Op-Amp, Resistor 10 kΩ × 4, Ceramic capacitor 10 nF × 2, Electrolytic capacitor 10 µF × 2, Headphone jack module 3.5 mm, Potentiometer 10 kΩ, Battery holder 2 × AA and AA alkaline battery × 2.
How long does the hearing amplifier study take to build?
About 150 minutes for a intermediate maker.
