Idea
In short
How do you build a gesture-driven chair model?
Hand tilt drives a small chair model with obstacle stop. You need ESP32 DevKit V1 × 2, MPU6050 IMU, Robot car chassis kit 2WD (acrylic), L298N Dual H-Bridge Module, HC-SR04 Ultrasonic Sensor, Battery holder 4 × AA with switch and AA alkaline battery × 4.
- Level
- Advanced
- Time
- About 360 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Prototype assistive mobility.
Parts list
- Development BoardsESP32 DevKit V1 × 2
- Sensors
- Mechanical & Hardware
- Motor Drivers
- Sensors
- Power
- Batteries
How to build it
- Read tilt
- Send by ESP-NOW
- Drive
- Stop for obstacles
- Add a stop gesture
Common questions
What parts do I need for the gesture-driven chair model?
ESP32 DevKit V1 × 2, MPU6050 IMU, Robot car chassis kit 2WD (acrylic), L298N Dual H-Bridge Module, HC-SR04 Ultrasonic Sensor, Battery holder 4 × AA with switch and AA alkaline battery × 4.
How long does the gesture-driven chair model take to build?
About 360 minutes for a advanced maker.
