Idea
In short
How do you build a divide-by-100 clock divider?
A 555 oscillator feeds a dual decade counter, and you see a pulse slow down by ten and by a hundred on three LEDs. You need 74HC390 dual decade counter, NE555 Timer IC, Resistor 10 kΩ, Resistor 100 kΩ, Electrolytic capacitor 10 µF, LED 5 mm red × 3, Resistor 1 kΩ × 3, Micro USB breakout board, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 10
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Divide a clock by ten twice.
Parts list
- Integrated Circuits
- Integrated Circuits
- Passives
- Passives
- Passives
- SemiconductorsLED 5 mm red × 3
- PassivesResistor 1 kΩ × 3
- Connectors
- Power
- Prototyping
How to build it
- Build the 555 clock
- Wire the first counter
- Chain the second
- Light three outputs
- Measure each speed
Common questions
What parts do I need for the divide-by-100 clock divider?
74HC390 dual decade counter, NE555 Timer IC, Resistor 10 kΩ, Resistor 100 kΩ, Electrolytic capacitor 10 µF, LED 5 mm red × 3, Resistor 1 kΩ × 3, Micro USB breakout board, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
How long does the divide-by-100 clock divider take to build?
About 210 minutes for a intermediate maker.
