Idea
In short
How do you build a phone-steered robot car?
A small robot car is steered from a phone app over Bluetooth, with a stop command and a signal timeout. You need Arduino Uno R3, HC-05 Bluetooth Module, L298N Dual H-Bridge Module, TT gear motor 3 to 6 V × 2, 9 V battery, Resistor 1 kΩ, Resistor 2.2 kΩ and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 300 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Drive a car from a phone.
Parts list
- Development Boards
- Wireless
- Motor Drivers
- Motors & Actuators
- Batteries
- Passives
- Passives
- Prototyping
How to build it
- Wire the motor driver
- Wire the Bluetooth module
- Parse four commands
- Drive and turn
- Stop if no command for a second
Common questions
What parts do I need for the phone-steered robot car?
Arduino Uno R3, HC-05 Bluetooth Module, L298N Dual H-Bridge Module, TT gear motor 3 to 6 V × 2, 9 V battery, Resistor 1 kΩ, Resistor 2.2 kΩ and Breadboard 830 Tie Points.
How long does the phone-steered robot car take to build?
About 300 minutes for a intermediate maker.
