Projects / Ideas / Removable sensor probe cable

Removable sensor probe cable

BeginnerHome LabIdeaReviewed
In short

How do you build a removable sensor probe cable?

A four-pin aviation connector makes a sensor probe that can be unplugged without rewiring. You need Arduino Nano, GX16 aviation connector (4-pin), DS18B20 waterproof probe, Resistor 4.7 kΩ and Breadboard 830 Tie Points.

Level
Beginner
Time
About 150 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Make a detachable probe.

How to build it

  1. Plan the pin map
  2. Wire the connector
  3. Read the probe
  4. Test unplugging
  5. Label the connector

Related projects

Common questions

What parts do I need for the removable sensor probe cable?

Arduino Nano, GX16 aviation connector (4-pin), DS18B20 waterproof probe, Resistor 4.7 kΩ and Breadboard 830 Tie Points.

How long does the removable sensor probe cable take to build?

About 150 minutes for a beginner maker.