Idea
In short
How do you build a digital guitar effects box?
An ESP32 with an audio codec runs delay, chorus and overdrive in real time, picked with a knob and an OLED menu. You need ESP32 DevKit V1, WM8960 audio codec HAT for Pi, SSD1306 OLED Display, Rotary encoder module (KY-040), Potentiometer 10 kΩ × 2, TL072 dual JFET op-amp and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 360 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Process audio sample by sample with low latency.
Parts list
- Development Boards
- AudioOr any I2S codec with line in
- Displays
- Sensors
- Passives
- Integrated Circuits
- Prototyping
How to build it
- Buffer the guitar with an op-amp stage
- Read and write samples over I2S at 44.1 kHz
- Write a delay line with feedback
- Add overdrive with soft clipping
- Keep latency under 10 ms
Common questions
What parts do I need for the digital guitar effects box?
ESP32 DevKit V1, WM8960 audio codec HAT for Pi, SSD1306 OLED Display, Rotary encoder module (KY-040), Potentiometer 10 kΩ × 2, TL072 dual JFET op-amp and Breadboard 830 Tie Points. WM8960 audio codec HAT for Pi: Or any I2S codec with line in.
How long does the digital guitar effects box take to build?
About 360 minutes for a advanced maker.
