Components / Interface and audio modules / WM8960 audio codec HAT for Pi

WM8960 audio codec HAT for Pi

Microphones, speaker amp and headphone out for a Pi.

FunctionStereo codec
InterfaceI2S on the 40-pin header
AudioReviewedMPN WM8960 Audio HATUsed in 3 projects
In short

What is the WM8960 audio codec HAT for Pi and what is it used for?

Microphones, speaker amp and headphone out for a Pi. Makers use it for voice assistants on a Pi.

How it works

A Wolfson WM8960 codec with microphones and a small amplifier.

Key specifications

Interface module specValue
FunctionStereo codec
InterfaceI2S on the 40-pin header

Pinout

40-pin headerI2S and I2C

How to use it

Install the maker's driver, then use it as the Pi's sound card with two microphones and speaker outputs. Good for voice assistants.

Applications

Alternatives

Common questions

What is the WM8960 audio codec HAT for Pi used for?

In maker projects: voice assistants on a Pi.

How does the WM8960 audio codec HAT for Pi work?

A Wolfson WM8960 codec with microphones and a small amplifier.

How do I connect the WM8960 audio codec HAT for Pi to an Arduino or ESP32?

I2S on the 40-pin header. Pins: 40-pin header (I2S and I2C).

What can I use instead of the WM8960 audio codec HAT for Pi?

MAX98357A I2S amplifier breakout.