Idea
In short
How do you build a grow light intensity meter?
A BH1750 shows lux under a grow light, so you can place seedlings at the right distance and track fading of old lamps. You need Arduino Nano, BH1750 light sensor, SSD1306 OLED Display and Tactile push button 6 mm.
- Level
- Intermediate
- Time
- About 90 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure light level and understand lux versus plant light.
Parts list
- Development Boards
- Sensors
- Displays
- Switches
How to build it
- Wire the BH1750 on I2C
- Read lux in high-resolution mode
- Hold a minimum, maximum and average
- Add a hold button
- Chart lux against distance from the lamp
Common questions
What parts do I need for the grow light intensity meter?
Arduino Nano, BH1750 light sensor, SSD1306 OLED Display and Tactile push button 6 mm.
How long does the grow light intensity meter take to build?
About 90 minutes for a intermediate maker.
