Idea
In short
How do you build an LPG cylinder weight monitor?
A platform with load cells under the gas cylinder shows how much LPG is left and warns you to book a refill a week ahead. You need Arduino Nano, Weight sensor 50 kg half-bridge (bathroom scale) × 4, HX711 load cell amplifier, SSD1306 OLED Display and Active buzzer 5 V.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Weigh a heavy object and subtract the container's tare weight.
Parts list
- Development Boards
- Sensors
- Sensors
- Displays
- Motors & Actuators
How to build it
- Build a sturdy platform on four half-bridge load cells
- Calibrate with known weights up to 30 kg
- Enter the empty cylinder weight printed on its collar
- Show gas left in kg and percent
- Beep below 2 kg
Common questions
What parts do I need for the LPG cylinder weight monitor?
Arduino Nano, Weight sensor 50 kg half-bridge (bathroom scale) × 4, HX711 load cell amplifier, SSD1306 OLED Display and Active buzzer 5 V.
How long does the LPG cylinder weight monitor take to build?
About 150 minutes for a intermediate maker.
