Idea
In short
How do you build a smooth fades on an RGB LED?
Fade a single WS2812B LED through colours with and without gamma correction. You see why a raw RGB blend looks muddy and how a lookup table makes the colours richer. You need Raspberry Pi Pico H, WS2812B single LED module (8 mm / breakout), Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Beginner
- Time
- About 60 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make colour fades look natural.
Parts list
- Development Boards
- Optoelectronics
- Prototyping
- Prototyping
How to build it
- Wire the LED to a Pico pin
- Fade red to blue raw
- Add a gamma lookup table
- Compare the two on the same sweep
- Make a colour wheel
Related projects
Common questions
What parts do I need for the smooth fades on an RGB LED?
Raspberry Pi Pico H, WS2812B single LED module (8 mm / breakout), Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the smooth fades on an RGB LED take to build?
About 60 minutes for a beginner maker.
