Projects / Ideas / LED advent calendar

LED advent calendar

IntermediateLightingIdeaReviewed
In short

How do you build an LED advent calendar?

A Pico with a DS3231 clock lights one more LED on a strip each day from the first to the twenty-fourth of December, with a button to flash today's LED, for a countdown on a wall. Keep the brightness low and the strip on a USB supply. You need Raspberry Pi Pico H, DS3231 RTC module, WS2812B addressable RGB LED strip (1 m, 60 LEDs), Tactile push button 6 mm, Resistor 330 Ω and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 140 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Count down to a festival, one LED a day.

How to build it

  1. Wire the clock and the strip
  2. Set the date on the clock
  3. Work out the day count
  4. Light that many LEDs
  5. Flash today's LED on the button

Related projects

Common questions

What parts do I need for the LED advent calendar?

Raspberry Pi Pico H, DS3231 RTC module, WS2812B addressable RGB LED strip (1 m, 60 LEDs), Tactile push button 6 mm, Resistor 330 Ω and Breadboard 830 Tie Points.

How long does the LED advent calendar take to build?

About 140 minutes for a intermediate maker.