Projects / Ideas / LED ring hourglass

LED ring hourglass

BeginnerLightingIdeaReviewed
In short

How do you build an LED ring hourglass?

A Pico sets a countdown with a rotary encoder and shows it on a 16-LED ring that empties like an hourglass, with a beep and a flash at the end. Keep the brightness low and do not stare at the LEDs. You need Raspberry Pi Pico H, WS2812B ring 16 LEDs, Rotary encoder module (KY-040), Passive buzzer and Breadboard 830 Tie Points.

Level
Beginner
Time
About 130 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

See time run out as a ring of light.

Parts list

How to build it

  1. Wire the ring with a series resistor on its data line
  2. Read the encoder to set the minutes
  3. Light the ring in proportion to the time
  4. Count down once a second
  5. Flash and beep at zero

Related projects

Common questions

What parts do I need for the LED ring hourglass?

Raspberry Pi Pico H, WS2812B ring 16 LEDs, Rotary encoder module (KY-040), Passive buzzer and Breadboard 830 Tie Points.

How long does the LED ring hourglass take to build?

About 130 minutes for a beginner maker.