Projects / Ideas / FPV analogue video ground station

FPV analogue video ground station

IntermediateDrones & RCIdeaReviewed
In short

How do you build an FPV analogue video ground station?

A video receiver and small screen show the drone camera feed, with an OSD for battery and signal. You need 7 inch HDMI display (1024x600), Li-Po 2S 7.4 V 2200 mAh 25C (RC), LM2596 Buck Module and XT30 connector pair.

Level
Intermediate
Time
About 120 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Receive analogue video.

How to build it

  1. Power the screen from a 2S pack
  2. Regulate to 5 V
  3. Add an antenna
  4. Show video
  5. Mount to the radio

Related projects

Common questions

What parts do I need for the FPV analogue video ground station?

7 inch HDMI display (1024x600), Li-Po 2S 7.4 V 2200 mAh 25C (RC), LM2596 Buck Module and XT30 connector pair.

How long does the FPV analogue video ground station take to build?

About 120 minutes for a intermediate maker.