Projects / Ideas / Aquarium auto-feeder

Aquarium auto-feeder

IntermediateHome LabIdeaReviewed
In short

How do you build an aquarium auto-feeder?

A servo rotates a small hopper to drop a pinch of food at set times, with a missed-feed warning. You need Arduino Nano, SG90 Micro Servo, DS3231 RTC module, Tactile push button 6 mm, Passive buzzer, Resistor 10 kΩ and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Dispense a fixed amount on a schedule.

Parts list

How to build it

  1. Build a hopper that drops a small amount
  2. Set feeding times
  3. Rotate the servo
  4. Test with dry rice
  5. Add a feed-now button

Related projects

Common questions

What parts do I need for the aquarium auto-feeder?

Arduino Nano, SG90 Micro Servo, DS3231 RTC module, Tactile push button 6 mm, Passive buzzer, Resistor 10 kΩ and Breadboard 830 Tie Points.

How long does the aquarium auto-feeder take to build?

About 210 minutes for a intermediate maker.