Idea
In short
How do you build a fidget spinner speed meter?
A reflective sensor beside a fidget spinner counts the passes of a strip of tape and shows its speed in turns per minute, then times how long it takes to slow to a stop. A lovely way to see friction and spin-down. Keep the sensor clear of the spinning arms. You need Arduino Nano, TCRT5000 IR reflective sensor module, SSD1306 OLED Display, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Beginner
- Time
- About 80 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure how fast a spinner turns and slows.
Parts list
- Development Boards
- Sensors
- Displays
- Switches
- Prototyping
- Prototyping
How to build it
- Stick reflective tape on one arm
- Count passes with an interrupt
- Work out turns per minute
- Time the slowdown to a stop
- Compare two spinners
Related projects
Common questions
What parts do I need for the fidget spinner speed meter?
Arduino Nano, TCRT5000 IR reflective sensor module, SSD1306 OLED Display, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the fidget spinner speed meter take to build?
About 80 minutes for a beginner maker.
