Idea
In short
How do you build a GSM missed-call gate opener?
Give a missed call from an allowed phone number and a 4G module opens a farm gate motor, then hangs up so the call is free. You need Arduino Uno R3, SIM A7670C 4G module, Relay module 2-channel 5 V, LM2596 Buck Module, 12 V 2 A DC adapter and ABS project box (100 × 60 × 25 mm).
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read caller ID from AT command messages and check it against a list.
Parts list
- Development Boards
- Wireless
- Interfaces
- Power
- Power
- Mechanical & Hardware
How to build it
- Enable caller ID with AT+CLIP=1
- When RING arrives, read the number in +CLIP
- If it is in the allowed list, hang up with ATH and pulse the gate relay
- Ignore all other numbers
- Log the time and number of each opening
Common questions
What parts do I need for the GSM missed-call gate opener?
Arduino Uno R3, SIM A7670C 4G module, Relay module 2-channel 5 V, LM2596 Buck Module, 12 V 2 A DC adapter and ABS project box (100 × 60 × 25 mm).
How long does the GSM missed-call gate opener take to build?
About 150 minutes for a intermediate maker.
