Idea
In short
How do you build an IR remote for an old ceiling fan regulator?
A TV remote steps a ceiling fan through five speeds using relays that switch capacitor values, like a modern electronic regulator. You need Arduino Nano, IR receiver VS1838B, Relay module 4-channel 5 V and ABS project box (100 × 60 × 25 mm).
- Level
- Advanced
- Time
- About 240 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Understand capacitor-type fan regulators and switch them safely with relays.
Parts list
- Development Boards
- Sensors
- Interfaces
- Mechanical & Hardware
How to build it
- Learn how capacitor regulators set speed with series capacitors
- Map five remote buttons to relay combinations
- Never switch two combinations at once: turn all off, wait, then turn on
- Use X-rated fan capacitors of the right value
- Mains wiring must be done by a qualified electrician
Common questions
What parts do I need for the IR remote for an old ceiling fan regulator?
Arduino Nano, IR receiver VS1838B, Relay module 4-channel 5 V and ABS project box (100 × 60 × 25 mm).
How long does the IR remote for an old ceiling fan regulator take to build?
About 240 minutes for a advanced maker.
