Idea
In short
How do you build an ESP32-S2 plant light logger?
An ESP32-S2 Mini reads a BH1750 light sensor in a plant window and logs the daily light total to a microSD card, so you can compare spots in the house. You need ESP32-S2 Mini, BH1750 light sensor, Micro SD card module (SPI, 3.3 V) and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 170 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Log how much light a plant gets in a day.
Parts list
- Development Boards
- Sensors
- Interfaces
- Prototyping
How to build it
- Wire the sensor on I2C
- Wire the card module over SPI
- Read the light every minute
- Add up the daily light
- Write one line a day to the card
Common questions
What parts do I need for the ESP32-S2 plant light logger?
ESP32-S2 Mini, BH1750 light sensor, Micro SD card module (SPI, 3.3 V) and Breadboard 830 Tie Points.
How long does the ESP32-S2 plant light logger take to build?
About 170 minutes for a intermediate maker.
