Components / Interface and audio modules / Micro SD card module (SPI, 3.3 V)

Micro SD card module (SPI, 3.3 V)

Simple microSD breakout without a regulator, for 3.3 V boards.

FunctionMicroSD over SPI
Supply voltage3.3 V
InterfaceSPI
Logic level3.3 V
InterfacesReviewedMPN MicroSD SPI 3.3VUsed in 3 projects
MICRO
In short

What is the Micro SD card module (SPI, 3.3 V) and what is it used for?

Simple microSD breakout without a regulator, for 3.3 V boards. Makers use it for ESP32 data logging.

How it works

The card's SPI mode is wired straight to the header.

Key specifications

Interface module specValue
FunctionMicroSD over SPI
Supply voltage3.3 V
InterfaceSPI
Logic level3.3 V

Pinout

CSChip select
SCK MOSI MISOSPI
VCC3.3 V
GNDGround

How to use it

It has no regulator or level shifter, so use it only with 3.3 V boards like ESP32 and Pico. Format cards up to 32 GB as FAT32 and use the SD or SdFat library.

Applications

Alternatives

Buy at

Common questions

What is the Micro SD card module (SPI, 3.3 V) used for?

In maker projects: ESP32 data logging.

How does the Micro SD card module (SPI, 3.3 V) work?

The card's SPI mode is wired straight to the header.

What voltage does the Micro SD card module (SPI, 3.3 V) need?

3.3 V.

How do I connect the Micro SD card module (SPI, 3.3 V) to an Arduino or ESP32?

SPI. Pins: CS (Chip select), SCK MOSI MISO (SPI), VCC (3.3 V), GND (Ground).

What can I use instead of the Micro SD card module (SPI, 3.3 V)?

MicroSD Card Module.