Projects / Ideas / Wireless firmware update demo

Wireless firmware update demo

IntermediateIoTIdeaReviewed
In short

How do you build a wireless firmware update demo?

A board updates its own program over Wi-Fi, so you can change it without a cable. You need ESP32 DevKit V1, LED 5 mm red, Resistor 220 Ω and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use over-the-air updates safely.

Parts list

How to build it

  1. Join your network
  2. Start the update service
  3. Protect it with a password placeholder
  4. Upload a new version
  5. Verify the version number

Related projects

Common questions

What parts do I need for the wireless firmware update demo?

ESP32 DevKit V1, LED 5 mm red, Resistor 220 Ω and Breadboard 830 Tie Points.

How long does the wireless firmware update demo take to build?

About 210 minutes for a intermediate maker.