Idea
In short
How do you build a pair of ESP32 LoRa range testers?
Two ESP32 boards with LoRa modules exchange short ping and reply messages and report signal strength, to test range outdoors. Use only the licence-free band allowed in your country and the antenna that came with the module. You need ESP32 DevKit V1 × 2, SX1276 LoRa Module × 2, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 190 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure LoRa range between two boards.
Parts list
- Development BoardsESP32 DevKit V1 × 2
- Wireless
- Displays
- Prototyping
How to build it
- Check the band and legal power limit
- Wire the module over SPI
- Send a numbered ping
- Reply from the second board
- Show signal strength and lost packets
Common questions
What parts do I need for the pair of ESP32 LoRa range testers?
ESP32 DevKit V1 × 2, SX1276 LoRa Module × 2, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the pair of ESP32 LoRa range testers take to build?
About 190 minutes for a advanced maker.
