Idea
In short
How do you build a wi-Fi doorbell button?
A tiny Wi-Fi board sends a message to your own server or phone app when a button is pressed. Use placeholders for network details, never hard-code them in shared code. You need ESP32-C3 DevKitM-1, Tactile push button 6 mm, Resistor 10 kΩ and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Send a button message.
Parts list
- Development Boards
- Switches
- Passives
- Prototyping
How to build it
- Wire the button
- Join your Wi-Fi
- Send a test message
- Add debounce
- Add a retry
Common questions
What parts do I need for the wi-Fi doorbell button?
ESP32-C3 DevKitM-1, Tactile push button 6 mm, Resistor 10 kΩ and Breadboard 830 Tie Points.
How long does the wi-Fi doorbell button take to build?
About 210 minutes for a intermediate maker.
