Projects / Ideas / ESP-NOW two-board messenger

ESP-NOW two-board messenger

IntermediateIoTIdeaReviewed
In short

How do you build an ESP-NOW two-board messenger?

Two ESP32 boards send short text messages to each other without a router. You need ESP32 DevKit V1 × 2, Tactile push button 6 mm × 2, SSD1306 OLED Display × 2, Resistor 10 kΩ × 2, Breadboard 830 Tie Points × 2 and Jumper wires male to male (40 pcs, 20 cm).

Level
Intermediate
Time
About 210 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use ESP-NOW for a direct link.

Parts list

How to build it

  1. Find each board's MAC address
  2. Register the peer
  3. Send a short preset message
  4. Show it on the other OLED
  5. Add a delivery acknowledgement

Related projects

Common questions

What parts do I need for the ESP-NOW two-board messenger?

ESP32 DevKit V1 × 2, Tactile push button 6 mm × 2, SSD1306 OLED Display × 2, Resistor 10 kΩ × 2, Breadboard 830 Tie Points × 2 and Jumper wires male to male (40 pcs, 20 cm).

How long does the ESP-NOW two-board messenger take to build?

About 210 minutes for a intermediate maker.