Projects / Ideas / Persistent settings memory

Persistent settings memory

BeginnerLearningIdeaReviewed
In short

How do you build a persistent settings memory?

An external EEPROM stores a counter and settings that survive power loss. You need Arduino Nano, AT24C256 EEPROM module, Tactile push button 6 mm and Breadboard 830 Tie Points.

Level
Beginner
Time
About 150 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Store data in non-volatile memory.

Parts list

How to build it

  1. Wire the EEPROM
  2. Write a byte
  3. Read it back after a restart
  4. Add wear levelling for a counter
  5. Store a settings struct

Related projects

Common questions

What parts do I need for the persistent settings memory?

Arduino Nano, AT24C256 EEPROM module, Tactile push button 6 mm and Breadboard 830 Tie Points.

How long does the persistent settings memory take to build?

About 150 minutes for a beginner maker.