AT24C256 EEPROM module
32 KB I2C EEPROM on a breakout.
FunctionSerial EEPROM
Supply voltage2.7 to 5.5 V
InterfaceI2C (0x50 to 0x57)
Logic levelMatches supply
InterfacesReviewedMPN AT24C256 moduleUsed in 3 projects
In short
What is the AT24C256 EEPROM module and what is it used for?
32 KB I2C EEPROM on a breakout. Makers use it for settings storage.
How it works
32 KB of non-volatile EEPROM on I2C.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | Serial EEPROM |
| Supply voltage | 2.7 to 5.5 V |
| Interface | I2C (0x50 to 0x57) |
| Logic level | Matches supply |
Pinout
VCC GND2.7 to 5.5 V
SDA SCLI2C
A0 A1 A2Address jumpers (0x50 to 0x57)
WPHigh to protect
How to use it
Write in pages of up to 64 bytes and wait 5 ms after each write. Each cell lasts about a million writes, so avoid logging to the same address every second.
Applications
Settings storage
Builds that use it
Alternatives
- 24C02 / AT24C256 EEPROMBare chip
- Micro SD card module (SPI, 3.3 V)Gigabytes of storage
Common questions
What is the AT24C256 EEPROM module used for?
In maker projects: settings storage.
How does the AT24C256 EEPROM module work?
32 KB of non-volatile EEPROM on I2C.
What voltage does the AT24C256 EEPROM module need?
2.7 to 5.5 V.
How do I connect the AT24C256 EEPROM module to an Arduino or ESP32?
I2C (0x50 to 0x57). Pins: VCC GND (2.7 to 5.5 V), SDA SCL (I2C), A0 A1 A2 (Address jumpers (0x50 to 0x57)), WP (High to protect).
What can I use instead of the AT24C256 EEPROM module?
24C02 / AT24C256 EEPROM and Micro SD card module (SPI, 3.3 V).
