Projects / Ideas / BCD thumbwheel readout

BCD thumbwheel readout

BeginnerDigital LogicIdeaReviewed
In short

How do you build a BCD thumbwheel readout?

A thumbwheel switch sets a digit and a decoder shows it on a seven-segment display. You need Thumbwheel switch (BCD), CD4511 BCD to 7-segment decoder, 7-segment display 1 digit (common cathode), Resistor 330 Ω × 7, Resistor 10 kΩ × 4 and Breadboard 830 Tie Points.

Level
Beginner
Time
About 150 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Link switch codes, decoding and display.

How to build it

  1. Wire the BCD outputs
  2. Add pull-downs
  3. Feed the decoder
  4. Light the digit
  5. Test every setting

Related projects

Common questions

What parts do I need for the BCD thumbwheel readout?

Thumbwheel switch (BCD), CD4511 BCD to 7-segment decoder, 7-segment display 1 digit (common cathode), Resistor 330 Ω × 7, Resistor 10 kΩ × 4 and Breadboard 830 Tie Points.

How long does the BCD thumbwheel readout take to build?

About 150 minutes for a beginner maker.