Projects / Ideas / Long-cable climate probe

Long-cable climate probe

BeginnerAgricultureIdeaReviewed
In short

How do you build a long-cable climate probe?

A sturdier temperature and humidity sensor on a longer cable reads the air in a small greenhouse box. You need Arduino Nano, DHT21 / AM2301 humidity sensor, Resistor 10 kΩ, 16x2 LCD with I2C backpack (PCF8574) and Breadboard 830 Tie Points.

Level
Beginner
Time
About 150 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Read a remote climate probe.

How to build it

  1. Wire the sensor
  2. Add a pull-up
  3. Test with a short cable
  4. Try a longer cable
  5. Show min and max

Related projects

Common questions

What parts do I need for the long-cable climate probe?

Arduino Nano, DHT21 / AM2301 humidity sensor, Resistor 10 kΩ, 16x2 LCD with I2C backpack (PCF8574) and Breadboard 830 Tie Points.

How long does the long-cable climate probe take to build?

About 150 minutes for a beginner maker.