Projects / Ideas / Debug probe first steps

Debug probe first steps

IntermediateLearningIdeaReviewed
In short

How do you build a debug probe first steps?

Use a small debug probe to flash a Pico over its debug pins and step through a loop with breakpoints. You need Raspberry Pi Debug Probe, Raspberry Pi Pico H, LED 5 mm red, Resistor 330 Ω and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Debug with a probe.

Parts list

How to build it

  1. Connect the probe
  2. Flash a blink
  3. Set a breakpoint
  4. Watch a variable
  5. Step through the loop

Related projects

Common questions

What parts do I need for the debug probe first steps?

Raspberry Pi Debug Probe, Raspberry Pi Pico H, LED 5 mm red, Resistor 330 Ω and Breadboard 830 Tie Points.

How long does the debug probe first steps take to build?

About 210 minutes for a intermediate maker.