Components / Raspberry Pi and Jetson / Raspberry Pi Debug Probe

Raspberry Pi Debug Probe

Pico-based SWD and UART debugger for RP2040, RP2350 and other ARM chips.

FunctionSWD debugger and USB-UART
InterfaceUSB, 3-pin JST-SH
Logic level3.3 V
SBC AccessoriesReviewedMPN SC0889Used in 1 project
RASPBERR
In short

What is the Raspberry Pi Debug Probe and what is it used for?

Pico-based SWD and UART debugger for RP2040, RP2350 and other ARM chips. Makers use it for step-through debugging of Pico code.

How it works

An RP2040 running CMSIS-DAP firmware.

Key specifications

Interface module specValue
FunctionSWD debugger and USB-UART
InterfaceUSB, 3-pin JST-SH
Logic level3.3 V

Pinout

D port3-pin JST-SH SWD to the target
U port3-pin JST-SH UART
USBHost

How to use it

Connect the D port to a Pico's debug connector and use OpenOCD or the VS Code Pico extension to flash and step through code. The U port is a spare USB-serial adapter.

Applications

Alternatives

Buy at

Common questions

What is the Raspberry Pi Debug Probe used for?

In maker projects: step-through debugging of Pico code.

How does the Raspberry Pi Debug Probe work?

An RP2040 running CMSIS-DAP firmware.

How do I connect the Raspberry Pi Debug Probe to an Arduino or ESP32?

USB, 3-pin JST-SH. Pins: D port (3-pin JST-SH SWD to the target), U port (3-pin JST-SH UART), USB (Host).

What can I use instead of the Raspberry Pi Debug Probe?

ST-Link V2 programmer (clone) and J-Link EDU Mini.