Idea
In short
How do you build a battery voltage data logger?
Log a battery's voltage against time to a micro SD card to compare discharge curves. You need Arduino Uno R3, Voltage sensor module (0 to 25 V), MicroSD Card Module, DS3231 RTC module, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Record a discharge curve with a divider.
Parts list
- Development Boards
- Sensors
- Interfaces
- Sensors
- Prototyping
- Prototyping
How to build it
- Calibrate the voltage module
- Log voltage every minute
- Add a timestamp from the RTC
- Stop at a safe cut-off voltage
- Plot the CSV on a computer
Common questions
What parts do I need for the battery voltage data logger?
Arduino Uno R3, Voltage sensor module (0 to 25 V), MicroSD Card Module, DS3231 RTC module, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the battery voltage data logger take to build?
About 210 minutes for a intermediate maker.
