Projects / Ideas / Drop and freefall logger

Drop and freefall logger

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a drop and freefall logger?

An accelerometer notices when a small box is dropped and logs the time of freefall and the impact peak. Use a soft landing. You need Arduino Nano, LIS3DH accelerometer, MicroSD Card Module, DS3231 RTC module and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 270 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Detect freefall and impact.

Parts list

How to build it

  1. Wire the sensor and card
  2. Read acceleration in g
  3. Detect near-zero g
  4. Record the impact peak
  5. Save each event

Related projects

Common questions

What parts do I need for the drop and freefall logger?

Arduino Nano, LIS3DH accelerometer, MicroSD Card Module, DS3231 RTC module and Breadboard 830 Tie Points.

How long does the drop and freefall logger take to build?

About 270 minutes for a intermediate maker.