Projects / Ideas / Common ground two-board lab

Common ground two-board lab

BeginnerLearningIdeaReviewed
In short

How do you build a common ground two-board lab?

Send a signal from one Nano to another with and without joining their grounds, and watch the second board read nonsense until the grounds meet. You learn why every connected board needs a common ground. You need Arduino Nano × 2, LED 5 mm red, Resistor 220 Ω, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Beginner
Time
About 40 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

See why two boards must share a ground.

Parts list

How to build it

  1. Power each Nano from its own USB source
  2. Send a blinking signal from board A to board B
  3. Watch board B read it wrongly
  4. Join the grounds
  5. Watch the signal become reliable

Related projects

Common questions

What parts do I need for the common ground two-board lab?

Arduino Nano × 2, LED 5 mm red, Resistor 220 Ω, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the common ground two-board lab take to build?

About 40 minutes for a beginner maker.