Idea
In short
How do you build a crimp versus solder pull test?
Make several wire joints with a crimp tool and several by soldering, pull each one gently with a spring scale or small weights until it gives way, and compare. See which method is stronger and which is more consistent. Wear eye protection and mind the hot iron. You need JST XH 2.54 mm connector kit, Crimping tool (Dupont / JST), Soldering iron 60 W (adjustable temperature), Solder wire 60/40 (0.8 mm, 50 g) and Digital multimeter.
- Level
- Intermediate
- Time
- About 80 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Find which joint is stronger.
Parts list
- Connectors
- Tools & Instruments
- Tools & Instruments
- Tools & Instruments
- Tools & Instruments
How to build it
- Make five crimped joints
- Make five soldered joints
- Check each with a meter
- Add weight until each fails
- Compare the failure loads and the types of failure
Common questions
What parts do I need for the crimp versus solder pull test?
JST XH 2.54 mm connector kit, Crimping tool (Dupont / JST), Soldering iron 60 W (adjustable temperature), Solder wire 60/40 (0.8 mm, 50 g) and Digital multimeter.
How long does the crimp versus solder pull test take to build?
About 80 minutes for a intermediate maker.
