Projects / Ideas / Connector family board

Connector family board

BeginnerHome LabIdeaReviewed
In short

How do you build a connector family board?

Mount six common small connector types on a board with their names and current ratings, so you can tell them apart at the bench. You need JST PH 2.0 mm connector kit, Molex KK 2.54 mm connector, JST VH 3.96 mm connector, Deans T-plug connector pair, Anderson Powerpole 30 A and Cable ties (100 pcs).

Level
Beginner
Time
About 90 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Learn the common connectors.

How to build it

  1. Sort the connectors by pitch
  2. Measure each pitch with a ruler
  3. Label the current rating
  4. Mount them on the board
  5. Mate each with its pair

Related projects

Common questions

What parts do I need for the connector family board?

JST PH 2.0 mm connector kit, Molex KK 2.54 mm connector, JST VH 3.96 mm connector, Deans T-plug connector pair, Anderson Powerpole 30 A and Cable ties (100 pcs).

How long does the connector family board take to build?

About 90 minutes for a beginner maker.