Idea
In short
How do you build a colour-changing LED lab?
A seven-colour LED has a chip inside that cycles through colours, so you measure its current and cycle time at different voltages. You need 7-colour auto-changing LED 5 mm, Resistor 330 Ω, Potentiometer 10 kΩ, Digital multimeter, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 90 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Study a self-cycling LED.
Parts list
- Optoelectronics
- Passives
- Passives
- Tools & Instruments
- Power
- Prototyping
How to build it
- Light it through a resistor
- Time one full cycle
- Measure the current
- Lower the voltage
- Find the lowest working voltage
Common questions
What parts do I need for the colour-changing LED lab?
7-colour auto-changing LED 5 mm, Resistor 330 Ω, Potentiometer 10 kΩ, Digital multimeter, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
How long does the colour-changing LED lab take to build?
About 90 minutes for a beginner maker.
