Idea
In short
How do you build an air quality trend lamp?
A small air quality sensor shows a green, yellow or red lamp for the room trend. Readings are indicative, not a safety alarm. You need Arduino Nano, CCS811 air quality sensor, LED 5 mm red, LED 5 mm yellow, LED 5 mm green, Resistor 330 Ω × 3 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Show an air quality trend.
Parts list
- Development Boards
- Sensors
- Semiconductors
- Semiconductors
- Semiconductors
- PassivesResistor 330 Ω × 3
- Prototyping
How to build it
- Wire the sensor
- Wait for warm-up
- Read the values
- Set the bands
- Light the lamp
Common questions
What parts do I need for the air quality trend lamp?
Arduino Nano, CCS811 air quality sensor, LED 5 mm red, LED 5 mm yellow, LED 5 mm green, Resistor 330 Ω × 3 and Breadboard 830 Tie Points.
How long does the air quality trend lamp take to build?
About 180 minutes for a intermediate maker.
