Projects / Ideas / Two-zone watering controller

Two-zone watering controller

AdvancedAgricultureIdeaReviewed
In short

How do you build a two-zone watering controller?

Two soil sensors control two small pumps so each plant gets water only when its soil is dry. You need Arduino Nano, Capacitive Soil Moisture Module × 2, Mini submersible water pump (3 to 6 V) × 2, Relay module 2-channel 5 V and Breadboard 830 Tie Points.

Level
Advanced
Time
About 300 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Control two outputs from two sensors.

How to build it

  1. Calibrate dry and wet for each sensor
  2. Set thresholds with hysteresis
  3. Switch each pump through the relay
  4. Limit run time
  5. Log events

Related projects

Common questions

What parts do I need for the two-zone watering controller?

Arduino Nano, Capacitive Soil Moisture Module × 2, Mini submersible water pump (3 to 6 V) × 2, Relay module 2-channel 5 V and Breadboard 830 Tie Points.

How long does the two-zone watering controller take to build?

About 300 minutes for a advanced maker.