Projects / Ideas / Capacitive liquid level strip

Capacitive liquid level strip

AdvancedSensorsIdeaReviewed
In short

How do you build a capacitive liquid level strip?

Two copper strips on the outside of a container measure how high a liquid is, without touching it. You need Arduino Nano, MPR121 capacitive touch sensor, Copper clad board (single side) 10 × 15 cm and SSD1306 OLED Display.

Level
Advanced
Time
About 150 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Measure level through a wall.

How to build it

  1. Cut two long copper strips
  2. Stick them on the outside
  3. Measure changing capacitance
  4. Map it to level
  5. Calibrate for each liquid

Related projects

Common questions

What parts do I need for the capacitive liquid level strip?

Arduino Nano, MPR121 capacitive touch sensor, Copper clad board (single side) 10 × 15 cm and SSD1306 OLED Display.

How long does the capacitive liquid level strip take to build?

About 150 minutes for a advanced maker.